Kenwood NX-1200A User Manual page 38

Individual + Short Message
Allows you to specify a Unit ID to send short messages.
1 PF Button:
Press the programmed button to enter Individual Call Mode
(NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list.
3 Press the [ S ] button to enter Short Message Mode.
4 Press the [ <B ] and [ C> ] buttons to select a Short Message from the list
(NXDN/ DMR).
5 Press the PTT switch or Side 2 button to send short messages.
Individual + Status
Allows you to specify a Unit ID to send status messages.
1 PF Button:
Press the programmed button to enter Individual Call Mode
(NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
Menu Mode:
Call Mode (NXDN/ DMR) or Selcall Mode (FleetSync/ MDC-1200/ 5-tone).
2 Press the [ <B ] and [ C> ] buttons to select a Unit ID/ name from the list.
3 Press the [ S ] button to enter Status Mode.
4 Press the [ <B ] and [ C> ] buttons to select the status messages you want to
transmit.
5 Press the PTT switch or Side 2 button to send status messages.
[Analog/ NXDN/ DMR]
Select "IND SDM" and press the [ S ] button to enter Individual
[Analog/ NXDN/ DMR]
Select "IND STAT" and press the [ S ] button to enter Individual
38