First Alert FA162C Installation Instructions Manual page 90

2-partitioned
Hide thumbs Also See for FA162C:
Table of Contents

Advertisement

5881/5882 SERIES
RF RECEIVERS
(5800 System)
5800TM
TRANSMITTER
MODULE
used with 5827BD
Wireless 2-Way Keypad
4219
WIRED EXPANSION
MODULE
4204
RELAY MODULE
4229
WIRED EXPANSION/
RELAY MODULE
FA4285
PHONE MODULE
1. Physical:
7-3/8" (188mm) W x 4-3/8" (112mm) H x 1-7/16" (37mm) D
2. Electrical:
Voltage Input: 12VDC; Current Drain: 35mA
3. Range:
200ft (60m) nominal indoors from wireless transmitters (the
actual range to be determined with system in TEST mode).
4. Zones:
(With the Ademco FA162C )
5881L/5882L: accepts up to 8 transmitters
5881M/5882M: accepts up to 16 transmitters
5881H/5882H: accepts up to 24 transmitters
1. Physical:
2-1/4" W x 4-1/8" H x 7/8" D
2. Electrical:
Voltage Input: 12VDC
1. Physical:
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
2. Electrical:
Voltage Input: 12VDC; Current Drain: 35mA
3. 8 EOLR Loops (AÐH):
(10Ð15msec)
response to an open.
1. Physical:
6-1/2" W x 4-1/4" H x 1-1/4" DÊ(169mm x 108mm x 32mm)
2. Electrical:
Voltage Input: 12VDC; Current Drain: 15mA(Relays off)
3. Four Output Relays:
1. Physical:
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
2. Electrical:
Voltage Input: 12VDC; Current Drain: 35mA (Relays off)
3. 8 EOLR Loops (AÐH):
4. Two Output Relays:
1. Physical:
6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm)
2. Electrical:
Voltage Input: 12VDC
3. Device Address: Permanently set to address 4.
4. Telephone Line Connections: See FA4285 PHONE MODULE section.
–90–
Note: 10-7/8" (277mm) H with antenna
(57mm x 105mm x 22mm)
Current Drain: 20mA
SPDT Contacts,
Rating:
2A max at 28VDC/AC
Loop A can be set for fast (10Ð15msec)
response to an open.
SPDT Contacts, Rating: 2A max at 28VDC/AC
Current Drain:160mA
Loop A can be set for fast
180mAÊ(Relays on)
100mA (Relays on)

Advertisement

Table of Contents
loading

Table of Contents