Installing An Sd Card - Zoom H2next Quick Manual

Installing an SD card

1.
After turning the power OFF , open the SD card slot cover.
2.
Insert the card into the slot.
To remove a card, push it further into
the slot and then pull it out.
NOTE
· Be sure to insert the SD card correctly, using the cut-off corner illustration next to the
slot as a guide.
· The built-in memory will be used if no SD card is in the recorder.
· Before using SD cards that have just been purchased or that have been formatted on a
computer, they must be formatted by the
SD CARD > FORMAT.
HINT
Built-in memory
· The built-in memory only keeps the most recent recording.
· The recording format is fixed at 96kbps MP3.
· It cannot be used to record in 4ch surround or MS-RAW modes.
· Recording time is limited to 1 minute.
· Recordings saved to the built-in memory cannot be copied to an SD card or a computer.
H2n
Handy Recorder
. To format an SD card, use MENU >
05