Table of Contents
Advertisement
NETWORK SETTINGS menu
NETWORK SETTINGS
Page name
Item
Page No.
<IP ADDR SET>
HOST IP ADDRESS
N01
SUB NET MASK
DEFAULT GATEWAY
SET
<LAN SETTINGS>
AUTO NEGOTIATION
N02
AUTO MDIX
CONNECT
CONFIGURATION
LINK CONDITION
SET
<CNS SETTINGS>
CNS MODE
N03
MCS MODE
CCU NO
MASTER IP ADDRESS 0.0.0.0 to 255.255.255.255
<NETWORK RESET>
ALL RESET
N04
Settings
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.254
0.0.0.0 to 255.255.255.255
ON, OFF
ON, OFF
CONNECT
10M, 100M
SPEED
DUPLEX MODE
HALF, FULL
MDI/MDIX
MDI, MDIX
SELECT
(DOWN), (UP)
LEGACY, BRIDGE, MCS
(CLIENT)
blank, 1 to 96
Description
Displays the IP address.
Displays the subnet mask.
Displays the default gateway.
A "SET OK?" message is displayed. Press ENTER
again to confirm the change. (Execute via ENTER.)
Selects whether to automatically set the connection
speed and communication system according to the
device connected.
Sets the communication line.
Selects the connection speed.
10M: 10BASE-TX
100M: 100BASE-TX
Available only when OFF is selected in AUTO
NEGOTIATION.
Selects the communication system.
HALF: Half-duplex communication.
FULL: Full-duplex communication.
Available only when OFF is selected in AUTO
NEGOTIATION.
Selects the communication line.
Displays connection status. (Display only)
(DOWN): Connection failure
(UP): Connection successful
A "SET OK?" message is displayed. Press ENTER
again to confirm the change. (Execute via ENTER.)
Sets the communication mode.
Displays that the CCU is a CLIENT.
Sets the CCU number.
Sets the master device's IP address for MCS mode.
A "NET SETTINGS RESET OK?" message is
displayed. Press ENTER again to reset NETWORK
SETTINGS menu items to factory default values.
(Execute via ENTER.)
52
Advertisement
Table of Contents
