Sony HKCU2040 Operation Manual page 48

Hd camera control unit
Hide thumbs Also See for HKCU2040:
Table of Contents

Advertisement

CCU
CONFIGURATION
Page name
Item
Page No.
<INTERCOM>
INTERCOM CH
C08
SYSTEM INTERFACE
PRODUCER
ENGINEER
PGM1 INPUT
PGM2 INPUT
<FRONT INCOM>
C09
INCOM MIC
SIDE TONE
PGM MIX
PGM SEL
Settings
1CH, 2CH
4WIRE, RTS, CLEAR COM
CANCEL LVL
–99 to 99, 0
TERMINATION
(OFF), ON
4WIRE, RTS, CLEAR COM
CANCEL LVL
–99 to 99, 0
TERMINATION
(OFF), ON
–20, 0, +4 dBu
–20, 0, +4 dBu
(MIC ON), (MIC OFF), (PGM ON)
(PROD), (ENG), (PRIVATE)
CARBON, ECM, DYNAMIC
MIC TYPE
BALANCE, UNBALANCE
MIC GAIN
–6dB, 0dB, +6dB
0 to 99, 50
OFF, INCOM+PGM, L-INCOM/R-
PGM
PGM1, PGM2, PGM1 + PGM2
PGM1 LVL
0 to 99, 50
PGM2 LVL
0 to 99, 50
Description
Selects the intercom channel number.
Sets the producer line intercom system.
Sets the side tone cancel level.
Connects to a 200 Ω terminator, if ON is selected
while 2-wire intercom interface (RTS or CLEAR
COM) is used.
(OFF): Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
Sets the engineer line intercom system.
Sets the side tone cancel level.
Connects to a 200 Ω terminator, if ON is selected
while 2-wire intercom interface (RTS or CLEAR
COM) is used.
(OFF): Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
Sets the PGM1 input level.
Sets the PGM2 input level.
CCU front panel MIC/PGM switch position. (Display
only)
CCU front panel INTERCOM switch position.
(Display only)
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
CARBON: Carbon microphone (power supply, 20dB
gain)
ECM: Electret condenser microphone (power
supply, 40dB gain)
DYNAMIC: Dynamic microphone (no power supply,
60dB gain)
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
BALANCE: Balanced microphone
UNBALANCE: Unbalanced microphone
Sets the input gain.
Sets the side tone level.
OFF: Signals are not mixed.
INCOM+PGM: INCOM and PGM signals are mixed.
L-INCOM/R-PGM: Outputs an INCOM signal
through the left channel and a PGM signal through
the right.
Selects the PGM type.
Sets the PGM1 level.
Sets the PGM2 level.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdcu2500Hdcu2000Hkcu2007Hkcu1001Hkcu1003

Table of Contents