Table of Contents
Advertisement
CCU
CONFIGURATION
Page name
Item
Page No.
<PROMPT/TRUNK 1>
PROMPTER CH
C10
TRUNK LINE
AUX REMOTE
<PROMPT/TRUNK 2>
NETWORK TRUNK
C11
HD PROMPTER
HD TRUNK
<VIDEO SETUP>
SETUP
C12
SD BLK CLP
Q FILTER
G/Y SYNC
VCS RELAY
<VIDEO ADJUST 1>
VBS
C13
(Available when a
HKCU1001 or HKCU1003
board is installed)
PIX
WFM
<VIDEO ADJUST 2>
VBS
C14
(Available when two
HKCU1001 or HKCU1003
boards are installed)
PIX
WFM
Settings
1CH, 2CH
CH
1CH, 2CH
IF
232C, 422A
RATE
(38Kbps), (19Kbps), (75Kbps),
(150Kbps)
DISABLE, ENABLE
MODE
(OFF), OFF, NETWORK,
NETWORK + VIDEO
RATE
---, (100Mbps), (1Gbps)
(ENABLE), (DISABLE)
FRAME SYNC
OFF, ON, (ON)
(ENABLE), (DISABLE)
ON, OFF, ---
OFF, ON
WD, NA
OFF, ON
OFF, ON
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
LEVEL
–99 to 99, 0
CHROMA
–99 to 99, 0
Description
Sets the number of prompter lines. (HDCU2500 is
locked to 1CH.)
Sets the number of channels to be used.
Sets the communication line mode.
Displays the TRUNK line. (Display only)
Sets whether or not AUX REMOTE is used.
(HDCU2000 only)
Sets the mode for the network trunk.
Sets the rate for the network trunk line.
Displays "ENABLE" or "DISABLE" for HD
PROMPTER.
Turns the frame sync function ON/OFF.
Displays "ENABLE" or "DISABLE" for HD TRUNK.
ON: Adds a setup signal to VBS and SD YCD
component signal Ych-SYNC.
OFF: No setup signal is added.
---: Displayed when the format is PAL. (Display only)
Y signals from SD SDI output that are less than 0%
are clipped at 0%.
Sets the Q filter bandwidth. (Displayed only when
HKCU1001 or HKCU1003 is installed.)
Sets the R/G/B component signal's G ch-SYNC to
on/off. (Displayed only when HKCU1001 or
HKCU1003 is installed.)
Sets the PIX/WFM connector output. (Displayed only
when HKCU1001 or HKCU1003 is installed.)
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
49
Advertisement
Table of Contents
