Konica Minolta bizhub 4702P User Manual page 59

Understanding the printer menus
Accessibility
Menu item
Duplicate Key Strike Interval
0–5 (0*)
Key Repeat Initial Delay
0.25–5 (1*)
Key Repeat Rate
0.5–30 (30*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Restore Factory Defaults
Menu item
Restore Settings
Restore all settings
Restore printer settings
Restore network settings
Restore fax settings
Restore app settings
Maintenance
Configuration Menu
Menu item
USB Configuration
USB PnP
1*
2
USB Configuration
USB Scan to Local
On*
Off
USB Configuration
USB Speed
Full
Auto*
Tray Configuration
Tray Linking
Automatic*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the interval in seconds during which the printer ignores duplicate key presses
on an attached keyboard.
Set the initial length of delay in seconds before a repeating key starts repeating.
Note: This menu item appears only when a keyboard is attached to the printer.
Set the number of presses per second for a repeating key.
Note: This menu item appears only when a keyboard is attached to the printer.
Description
Restore the printer factory default settings.
Note: The default value is the value selected during the initial setup.
Description
Change the USB driver mode of the printer to improve its
compatibility with a personal computer.
Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).
Set the USB port to run at full speed and disable its high‑speed
capabilities.
Set the printer to link the trays that have the same paper type
and paper size settings.
59