Faxing; Setting Up The Printer To Fax - Konica Minolta bizhub 4702P User Manual

Faxing

Faxing

Setting up the printer to fax

Notes:
•
The following connection methods are applicable only in some countries or regions.
•
During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then select Continue.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Setting up the fax function
1
From the home screen, touch Settings > Device > Preferences > Run Initial Setup.
2
Turn off the printer, wait for about 10 seconds, and then turn it back on.
3
From the Before You Begin screen, select Change the Settings and Continue with the Wizard.
4
From the Fax/Email Server Setup screen, enter the needed information.
5
Finish the setup.
Setting up fax using a standard telephone line
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
35