Olivetti d-COPIA5001MF Operation Manual page 567

Troubleshooting > Troubleshooting
Message
Select another
cassette.
*1
Send Error.
Skewed originals or
multi originals fed at
once.
SSD error.
Staple is empty.
Staple is empty.
(Manual Staple)
Checkpoints
Is the cassette you selected
correct?
—
—
—
*1
Has the staple cartridge holder
run out of staples?
Has staple cartridge holder A
run out of staples?
Corrective Actions
The specified cassette is a fax
special stage.
Select another valid cassette.
Select [Continue] to print.
An error has occurred during
transmission. The job is
canceled. Select [End]. Refer to
Responding to Send Error for
the error code and corrective
actions.
See the caution attached on the
document processor and check
the originals. If the originals are
jammed, follow the instructions
on the screen to remove the
originals.
An error has occurred on the
SSD. Job is canceled. Select
[End].
The error cords are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided,
the SSD is damaged. Execute
[System Initialization].
04: Insufficient space on the
SSD to complete this operation.
Move data or delete unneeded
data.
NOTE
Please be aware that when you
carry out initialization of the
system, the data saved in SSD
will be erased.
If the staples are depleted, the
machine will stop and the
location of staple depletion will
be indicated on the screen.
Leave the machine on and
follow the instructions to replace
the staple case. Select
[Continue] to print without
stapling. Select [Cancel] to
cancel the job.
Add staples to staple cartridge
holder A.
10-46
Reference
Page
—
page 10-50
—
—
page 10-10
page 10-12
page 10-13
page 10-15
page 10-16
page 10-13