Olivetti d-COPIA5001MF Operation Manual page 435

Setup and Registration (System Menu) > System Menu
Secure Comm. Error Log
[System Menu/Counter] key > [Report] > [Secure Comm. Error Log]
Item
Secure Comm. Error Log
Auto Sending
Destination
Subject
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login as an administrator or as a user with privileges to carry out this setting. The factory default login user
name and login password are set as shown below.
d-COPIA 5001MF
d-COPIA 6001MF
Select whether to record the secure communication error log history.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Select whether the secure communication error log history is automatically sent to the
set address when the number of entries reaches the number set in "Secure Comm.
Error Log".
Value: Off, On
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Set the destination to which secure communication error log histories are sent. E-mail
address only can be set as destination.
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Set the subject automatically entered when sending secure communication error log
histories by E-mail.
Value: Up to 256 characters
NOTE
This function is displayed when "Secure Communication Error Log History" is set to
[On].
Model Name Login User Name
5000
6000
Description
Login Password
5000
6000
8-50