Repeat Copy - Olivetti d-COPIA5001MF Operation Manual

Using Various Functions > Functions

Repeat Copy

Copy Advanced
Setup
Enables additional copies in the desired quantity as necessary after a copy job is completed.
For confidential documents, you can set up a password for the use of Repeat Copy. In such a case, the correct
password must be entered to perform Repeat Copy.
To register a password, select [# Keys] and enter a 4-digit password.
IMPORTANT
• A Repeat Copy job is cleared when the power switch is turned off.
• If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the
password beforehand if necessary.
(Value: [Off] / [On])
Repeat Copy is not available when the Data Security Function is active.
When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be
used.
Repeat Copy Job Retention (page 8-41)
You can select Repeat Copy as the default setting.
Repeat Copy (page 8-22)
Giving a file name to a copy job will facilitate identification of the data when copying.
File Name Entry (page 6-69)
Repeat Copy
The Repeat Copy jobs are stored in the Job Box. Refer to Outputting Repeat Copy Jobs to print out the Repeat Copy
jobs.
Outputting Repeat Copy Jobs (page 5-66)
6-70