Error Messages And Ftp Status - Omron CS1W-ETN11 Operation Manual

Using FTP Commands
7-5-3

Error Messages and FTP Status

Error Messages
Message
PPP is a directory.
PPP is not a directory.
Another unit has access authority
(FINS error 0 x 3001)
Bad sequence of commands.
Can't create data socket (X.X.X.X, YY)
Cannot access a device (FINS error 0 x 250F).
Cannot get memory blocks.
Command format error (FINS error 0 x 1003).
Connect error.
Directories of the old and the new paths are not
same.
Directory name length exceeded max. size.
Directory not empty (FINS error 0 x 2108).
Fatal error (FINS error 0 x 1101).
Fatal error (FINS error 0 x 1103).
File or directory already exists.
File or directory already exists
(FINS error 0 x 2107).
File or directory name illegal.
File or directory name illegal
(FINS error 0 x 110C).
File read error (FINS error 0 x 1104).
File read error (FINS error 0 x 110B).
File write error (FINS error 0 x 2106).
File write error (FINS error 0 x 2107).
FINS error MRES 0 x XX: SRES 0 x XX.
Length of directory name too long.
No space to create entry (FINS error 0 x 2103).
No such device (FINS error 0 x 2301).
No such file or directory.
No such file or directory (FINS error 0 x 2006).
No such file or directory (FINS error 0 x 2106).
No enough memory.
Not enough space in the system.
(FINS error 1104).
PLC communication error (timeout).
Socket canceled.
Socket error NN.
Socket receive error NN.
Socket send error NN.
Timeout (900 seconds): closing control connection. The connection was closed because the client did not respond for
Too many open files.
Write access denied.
Write access denied. (FINS error 0 x 2101).
172
The error messages returned by the Ethernet Unit are listed in the following
table.
The path name indicated at PPP is a directory.
The path name indicated at PPP is not a directory.
Another Unit currently has the access right.
The RNFR command has not been executed.
A socket cannot be created.
A file device error has occurred.
A message memory block cannot be allocated.
The command format is incorrect.
A connection error has occurred.
The directories before and after changing the name are different.
The directory name is too long.
The directory must be empty to delete it.
A parameter error has occurred.
The specified file or directory name already exists.
The file or directory name is incorrect.
An error occurs when reading the file.
An error occurs when reading the file.
Some other FINS error has occurred.
The path name of the directory is too long.
There are too many files to create a new one.
The file device cannot be found.
The specified file or directory does not exist.
The communications buffers are full.
The file device is full.
File access timed out.
The socket was canceled.
A socket bind error occurred. The error code will be given at NN.
A data reception error occurred. The error code will be given at NN.
A data send error occurred. The error code will be given at NN.
15 minutes.
Too many sockets have been created.
Writing is not possible.
Section 7-5
Meaning