Firmware Version 2/2 Screen; Ip Network Screen - Panasonic AW-UE100WP Operating Instructions Manual

Camera menu items (continued)

Firmware Version 2/2 screen

F i r m war e Ve rsion 2/2
E E P R O M
M a i n / N e two rk
F P G A
N e t w o r k
E n c
R 5 T
R 5 R
L o g i c
R e t u r n
EEPROM
Main/Network
Display the EEPROM version of the main/network.
FPGA
Network
Displays the version of the Network module.
Enc
Displays the version of the image compression module.
R5T
Displays the version of the video signal control module (at the front).
R5R
Displays the version of the video signal control module (at the back).
Logic
Displays the version of the main functional part of FPGA.
Return
Return to the previous menu level.

IP Network screen

V01.00
V01.00
V01.00
V01.00
V01.00
V01.00
IP Address
Set the IP address for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Subnet Mask
Set the subnet mask for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Default Gateway
Set the default gateway for this unit.
The set value is applied to this unit when [Set Execute] is executed.
Set Execute
Apply the values set in [IP Address], [Subnet Mask], and [Default
Gateway] to this unit.
Return
Return to the previous menu level.
<NOTE>
• The IP Network cannot be changed while the DHCP function is On.
• If the DHCP function is not to be used, change the setting for
[DHCP] to [Off] in the network settings screen of your web browser.
(→ page 141)
82
I P N e t w o r k
I P A d d r e s s
S u b n e t M a s k
D e f a u l t G a t e w a y
S e t E x e c u t e
R e t u r n
1 9 2 . 1 6 8 . 0 . 1 0
2 5 5 . 2 5 5 . 2 5 5 . 0
1 9 2 . 1 6 8 . 0 . 1