Panasonic AW-UE100WP Operating Instructions Manual page 118

4k integrated camera
Hide thumbs Also See for AW-UE100WP:
Table of Contents

Advertisement

Web screen configurations (continued)
TTL/HOP Limit
The same as H.264 Multicast TTL/HOPLimit (→ page 115).
Latency
Sets the time (ms) of playback on the listening side after the packet is
transmitted.
Factory settings: 120
<NOTE>
• In some cases, the set time is not guaranteed depending on the
network band.
Encryption
Sets whether to encrypt the transmitted IP image.
Off
Transmits unencrypted IP images.
AES-128
Encrypts IP images in AES-128 before transmitting.
AES-256
Encrypts IP images in AES-256 before transmitting.
Factory settings: Off
Passphrase
Sets the phrase used for decoding the encrypted IP images.
Streaming format
Makes settings for H.264 or H.265 images for use in SRT
transmission.
The setting is confirmed with the [Set] button.
Refer to the explanation for H.264 (→ page 113) or H.265
(→ page 115) for information about Image capture size, Frame rate
and Max bit rate(per client).
<NOTE>
• Streaming format settings cannot be changed during SRT
transmissions.
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 136)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off]
during SRT transmission.
• When the frame frequency is 24/23.98Hz, you cannot set to the
SRT(H.264), SRT(H.264 UHD), SRT(H.265), or SRT(H.265 UHD)
modes.
z NDI|HX
Make NDI|HX transmission settings.
The setting is confirmed with the [Set] button.
NDI|HX stream
NDI|HX transmission [On, Off]
Whether to transmit the NDI|HX images is set here.
Factory settings: On
Internet mode(Over HTTP) [On, Off]
This cannot be configured on [NDI|HX stream] screen.
Image capture size [1920×1080, 1280×720]
Select the resolution for NDI|HX images.
Factory settings: 1920×1080
Transmission priority
This cannot be configured on [NDI|HX stream] screen.
Frame rate [5fps, 12.5fps, 15fps, 25fps, 30fps, 50fps, 60fps]
Set the frame rate for NDI|HX images.
59.94Hz
5fps/15fps/30fps/60fps
50Hz
5fps/12.5fps/25fps/50fps
Factory settings:
For 59.94Hz: 60fps
For 50Hz: 50fps
<NOTE>
• When the frame frequency is 24/23.98Hz, you cannot set to the
NDI|HX mode.
• [60fps(50fps)] cannot be selected when the video format is
[29.97p(25p)].
118

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents