Panasonic AW-UE100WP Operating Instructions Manual page 126

Web screen configurations (continued)
ATW Speed [Slow, Normal, Fast]
Set the control speed of the ATW function.
Slow Tracks at a speed slower than [Normal].
Normal Tracks at normal speed.
Fast Tracks at a speed faster than [Normal].
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: Normal
ATW Target R [–10 to +10]
Make fine adjustments to the Rch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: 0
ATW Target B [–10 to +10]
Make fine adjustments to the Bch output when converging with the
auto tracking white balance operation.
This is only enabled when [White Balance Mode] is set to [ATW].
Factory settings: 0
Chroma Level [Off, –99% to 99%]
Set here the color intensity (chroma level) of the images.
Factory settings: 0%
Chroma Phase [–31 to +31]
Make fine adjustments to the hue of the colors in the images.
Factory settings: 0
ABB
When the [Execute] button is clicked, automatic black balance (ABB)
is executed and the black balance is reset.
Master Pedestal [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Factory settings: 0
R Pedestal [–100 to +100]
This enables the R pedestal to be adjusted.
Factory settings: 0
G Pedestal [–100 to +100]
This enables the G pedestal to be adjusted.
Factory settings: 0
B Pedestal [–100 to +100]
This enables the B pedestal to be adjusted.
Factory settings: 0
Pedestal Offset [Off, On]
Set the pedestal level of the Rch, Gch, and Bch when the auto black
balance has been adjusted.
Off Set the pedestal level to [0] for [R Pedestal], [G Pedestal],
and [B Pedestal].
On Maintain the values set for each of [R Pedestal],
[G Pedestal], and [B Pedestal].
Factory settings: Off
Detail [Off, On]
Turn on/off the contour (sharpness of images) adjustment of images.
Factory settings: On
Master Detail [–31 to +31]
Adjust the contour correction level (master).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Coring [0 to 60]
Set the level of the signal (including noise) which makes the detail
effect not work.
This is only enabled when [Detail] is set to [On].
Factory settings: 15
V Detail Level [–7 to +7]
Adjust the contour correction level in the vertical direction.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Frequency [–7 to +7]
Set the boost frequency of detail.
–7: Low frequency
to
+7: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Level Depend. [–7 to +7]
When the detail of bright signals are emphasized, the detail of dark
parts are compressed.
The larger the [Level Depend.] setting, the more detail of bright parts
is compressed.
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Knee Aperture Level [0 to 5]
Set the detail level of very bright parts.
This is only enabled when [Detail] is set to [On].
Factory settings: 2
Detail Gain(+) [–31 to +31]
Set the detail level of the plus direction (direction to be made
brighter).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Detail Gain(–) [–31 to +31]
Set the detail level of the minus direction (direction to be made
darker).
This is only enabled when [Detail] is set to [On].
Factory settings: 0
Skin Detail [Off, On]
This function smooths skin and produces a more beautiful image.
This is only enabled when [Detail] is set to [On].
Factory settings: Off
Skin Detail Effect [0 to 31]
The skin of human subjects appears smoother the larger the setting
value.
This is only enabled when [Detail] is set to [On] and [Skin Detail] is set
to [On].
Factory settings: 16
126