Panasonic AW-UE100WP Operating Instructions Manual page 104

Web screen configurations (continued)
z Frequency
„
Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]
This item is selected to switch the frame frequency.
The setting is confirmed with the [Set] button.
Factory settings: 59.94Hz (AW-UE100WP/AW-UE100KP/
AW-UE100WPC/AW-UE100KPC)
50Hz (AW-UE100WE/AW-UE100KE/
AW-UE100WED/AW-UE100KED)
<NOTE>
• When the frame frequency is switched, the unit automatically
restarts.
z Format
„
Format
For [59.94Hz]
2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,
1080/29.97PsF, 1080/23.98p(59.94i)
For [50Hz]
2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,
720/50p
For [24Hz]
2160/24p, 1080/24p
For [23.98Hz]
2160/23.98p, 1080/23.98p, 1080/23.98PsF
The video format is changed on this screen.
The setting is confirmed with the [Set] button.
* 1
It denotes "1080/23.98p over 59.94i".
<NOTE>
• In order to select [H.264(UHD)], [H.265(UHD)], [JPEG(UHD)],
[RTMP(UHD)], [SRT(H.264 UHD)], and [SRT(H.265 UHD)] in
[Streaming mode] for [Video over IP], you need to select the 4K
format here.
, 720/59.94p
1
*
z Shooting Mode
„
Shooting Mode [Normal, High Sens.]
Select the shooting mode according to the shooting environment.
The setting is confirmed with the [Set] button.
Normal Select when shooting in an environment with a normal
level of brightness.
High Sens. Select high sensitivity shooting. (Suited to shooting in a
dark environment)
Factory settings: Normal
z Genlock
„
This item is selected to perform the phase adjustments.
This item's setting is reflected immediately.
Horizontal Phase [–206 to +49]
This is used to adjust the horizontal phase during genlock.
Factory settings: 0
z Wireless Control
„
Wireless Control [Enable, Disable]
[Enable] or [Disable] is set here for operations conducted from the
wireless remote control.
The setting is confirmed with the [Set] button.
Factory settings: Enable
<NOTE>
• When the power is turned on with the wireless remote control, then
operations from the wireless remote control are possible irrespective
of this setting value.
• This item is not reflected immediately when the setting is changed.
It is reflected when the unit is set to Standby mode, and then the
power is turned ON with any external device other than the wireless
remote control.
• This setting is not reflected when the power is turned ON with this
item set to [Enable]. It is reflected when the unit is set to Standby
mode, and then the power is turned ON with any external device
other than the wireless remote control.
104