Panasonic AW-UE100WP Operating Instructions Manual page 135

Web screen configurations (continued)
Preset Crop [Off, On]
When the preset memory is played back, set whether the
reproduction of content set in the various [Crop Mode] menus is off/
on.
When set to [On], the content set in the various [Crop Mode] menus is
reproduced when preset memory is played back.
When set to [Off], the content set in the various [Crop Mode] menus is
not reproduced when preset memory is played back, with the current
values being kept.
Factory settings: Off
<NOTE>
• This is enabled only when [Format] in [System] screen is the
following.
2160/59.94p, 2160/29.97p
2160/50p, 2160/25p
2160/24p, 2160/23.98p
• This is only enabled when [Crop Mode] is set to [Crop(1080)] or
[Crop(720)].
Preset Thumbnail Update [Off, On]
Turn off/on the function for registering the still image (thumbnail) for
the images being output when a preset memory is registered.
When set to [On], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [Off], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
Factory settings: On
<NOTE>
• When the IP for [OSD Mix/Crop Marker] is [On], the menu screen is
included in the thumbnails.
• When [Crop Mode] is [Crop(1080)] or [Crop(720)], the cropped still
image is registered rather than the Full image.
• When uploading Camera(ALL) or Camera(SYSTEM) on the web
screen or other access, the still image (thumbnail) that has been
registered in preset memory will be erased. (→ page 157)
Preset Name [Reset, Hold]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
Reset When registering a preset memory, reset the
previously registered preset name.
The preset name after resetting will be [Preset
( is a 3 digit preset number: 001 to 100)
***
Hold When registering a preset memory, keep the
previously registered preset name.
Factory settings: Reset
<NOTE>
• The factory default setting for the preset name is [Preset
a 3 digit preset number: 001 to 100)
• The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
reproduced when preset memory is played back.
- Picture Level
- Iris Mode
- Auto Iris Speed
- Auto Iris Window
Factory settings: Off
<NOTE>
• Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A
Mode B
Factory settings: Mode A
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Factory settings: Off
].
***
]. ( is
*** ***
135
Perform the zoom operation in line with the pan/tilt
operation.
Perform the zoom operation quicker than the pan/tilt
operation.