IBM iLC400 User Manual page 42

Item
IP Address State
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply Settings
Description
Press the cursor left/right button to choose
between Static and DHCP settings. In Static,
the user can enter IP Address, Subnet Mask,
Default Gateway, and DNS Server. In DHCP,
the projector will have IP Address, Subnet
Mask, Default Gateway, and DNS Server set.
Note: The default setting is DHCP.
Press the cursor up/down button to change
the IP Address.
Note: The IP address can only be changed
when the IP Address State is Static.
Press the cursor up/down button to change
the Subnet Mask.
Note: The Subnet Mask can only be
changed when the IP Address State is Static.
Press the cursor up/down button to change
the Default Gateway.
Note: The Default Gateway can only be
changed when the IP Address State is Static.
Press the cursor up/down button to change
the DNS Server address.
Note: The DNS Server can only be changed
when the IP Address State is Static.
Select this to save and apply the settings.
Chapter 5. On-Screen Display menu controls
5-9