Table of Contents
Advertisement
Memory module
NOTE:
Primary and expansion memory is installed in a stacked configuration in the bottom of
the computer.
Description
8-GB memory module (PC3, 12800, 1600-MHz)
4-GB locked memory module (PC3, 12800, 1600-MHz)
4-GB memory module (PC3, 12800, 1600-MHz)
2-GB memory module (PC3, 12800, 1600-MHz)
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
result in various system problems.
To update BIOS:
1.
Navigate to www.hp.com.
2.
Click Support & Drivers > click Drivers & Software.
3.
In the Enter a product name/number box, type the computer model information, and then
click Search.
4.
Click the link for the computer model.
5.
Select the operating system, and then click Next.
6.
Under Step 2: Select a Download, click the BIOS link.
7.
Click the link for the most recent BIOS.
8.
Click the Download button, and then follow the on-screen instructions.
Before removing a memory module, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
82
Chapter 4 Removal and replacement procedures
Failure to update the computer to the latest BIOS prior to installing new memory may
Battery on page
Service cover on page
71).
74).
Spare part number
670034-001
707248-001
641369-001
652972-001
Advertisement
Table of Contents
