Table of Contents
Advertisement
Reference
P.189 "Multi-step Transfer Group
settings"
Sending the Transfer Result Report
This machine compares the own
fax number of the Requesting Par-
ty with the Requesting Party's
number programmed in a Quick
Dial or Speed Dial, and if the lower
five digits of the two numbers
match, it sends the Transfer Result
report to the Requesting Party.
For example:
• Requesting Party's own dial num-
ber:
001813-11112222
• Transfer Station's Quick Dial:
03-11112222
Transfer Result Report
This reports whether transmission to
the End Receivers was successful or
not.
When the Transfer Station has trans-
ferred the message to all End Receiv-
ers, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party.
Preparation
You must program the fax number
of the requesting party in a Quick
Dial or Speed Dial in the Transfer
Station.
P.180 "Registering Quick
Dials",
P.195 "Registering Speed
Dials"
Register the fax number in ad-
vance.
P.252 "Transfer Report"
Note
By default, a portion of the docu-
ment image is printed on this re-
port. You can turn this off with the
User Parameters.
ing the User Parameters"
Remote Transfer
This feature allows same make or oth-
er make fax machines without the
Transfer Request function to perform
transfer requests to this machine.
Preparation
In order for this machine to be able
to accept this function, you need to
register the Remote ID, and the
Transfer Result Report return ad-
dress in the Quick Dial or Speed
Dial.
P.250
Codes",
P.180 "Registering Quick
Dials",
P.195 "Registering Speed
Dials"
Limitation
The requesting party's fax machine
must be able to send out a push
signal.
The remote transfer station func-
tion only works with the standard
G3 line. The optional G3 Unit, G4
Unit and optional NIC FAX Kit are
not supported.
Note
You can select whether the ma-
chine accepts remote transfers or
not with the User Parameters.
When shipped, this feature is
turned off by default.
"Changing the User Parameters"
Reception Functions
P.236 "Chang-
"Registering
ID
P.236
3
93
Advertisement
Table of Contents
