Table of Contents
Advertisement
Basics
Starting the Machine
A
Press the operation switch.
1
The On indicator lights and the display turns on.
Note
If the machine does not start when the operation switch is pressed, make
sure the main power switch is on.
The machine will take up to 360 seconds to warm up during which copying
is not possible. However, you can set up a job during this period with the
Auto Start function. See
You can set up a copy job and press the {Start} key while the "Select copy
mode and press Start. Copying will start after warm up." message is dis-
played.
When "Enter user code, then press # key." is displayed, enter your user
code. See
Shutting Down the Machine
A
Press the operation switch.
The On indicator goes out.
Turning Off the Main Power
A
Press the Main Power switch.
The Main Power switch indicator goes out.
Note
If you leave the Main Power switch off for more than 20 days, the date set-
ting might be wrong. For how to set the date, see "Timer Settings" in the
System Settings manual.
14
P.69 "Auto Start".
P.69 "User Codes".
Advertisement
Table of Contents
