Original Tone; Sample Copy - Gestetner 10502 Copy Reference Manual

Copying
Note
To cancel Auto Start, press the {Stop} key.
In Connect Copy mode, press the {Stop} key on the master unit to cancel
Auto Start.

Original Tone

2
The tone sounds and an error message is displayed when you leave your origi-
nal on the exposure glass after copying, and set your originals in the document
feeder after copying.
Note
To stop the Original Tone, see "Original Tone"

Sample Copy

Use this feature to check a copy set before making a long copy run.
Limitation
This function can be used only when the Sort function has been turned on.
Note
This function is only available on the master unit in Connect Copy mode.
A
Select Sort and any other functions, then enter the number of copies to be
made.
B
Set the originals.
C
Press the {Sample Copy} key.
One copy is delivered for proof copying.
D
After checking the finish, press the [Print] key if the sample is acceptable.
The number of copies mode is the number you specified minus one for the
proof copy.
Note
If you press [Stop] after checking change, return to step A to adjust the copy
settings as necessary. You can change some settings. e.g., staple, punch,
margin adjust settings
70
P.318 "Display/Panel Tone".