Mounting; Mfd8/12 Mounting - Furuno MFD8 Installation Manual

Navnet display software v2.01
Hide thumbs Also See for MFD8:
Table of Contents

Advertisement

1. Mounting

1.1.

MFD8/12 Mounting

MFD8
MFD12
When selecting a mounting location for the NN3D MFD8/12, keep the following in mind:
• The temperature and humidity of the mounting location should be moderate and
stable.
• Install the unit away from exhaust pipes and ventilators.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the unit away from electromagnetic field generating equipment such as motors
and generators.
• For maintenance and checking purposes, leave sufficient space from the sides and the
rear of the unit and leave slack in cables. Minimum recommended space is shown the
outline drawing for the display units.
• A magnetic compass will be affected if the display unit is placed too close to it.
Observe the compass safe distances shown in the SAFETY INSTRUCTIONS to prevent
disturbances to the magnetic compass.
The MFD8/12 can be flush or bracket mounted in a variety of ways.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfd12Mfdbb

Table of Contents