Chapter 1
LED Explanation
Name
(Power)
(Ethernet)
(Wireless)
1. 2. 2.
The Back Panel
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons
ON/OFF
POWER
ETHERNET
Status
On
Power is on.
The system is starting up or the firmware is being upgraded. Do not
Flashing
disconnect or power off your access point.
Off
Power is off.
On
The ETHERNET port is connected to a powered-on device.
Off
The ETHERNET port is not connected to a powered-on device.
On
The wireless function is enabled.
Off
The wireless function is disabled.
To power on or off the access point.
For connecting the access point to a power socket via the provided power adapter.
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or
a router.
Get to Know About Your Access Point
Indication
Description
4