TP-Link TL-WA901N User Manual page 29

Chapter 4
Range Extender Mode
Wireless Bridge Setttings
• Wireless Name of Remote AP
Survey to find the network you want to connect to.
• MAC Address of Remote AP
Click the Survey button to detect the SSIDs in the local area.
• WDS Mode - This field determines which WDS Mode will be used. It is not necessary
to change the WDS Mode unless you notice network communication problems
with root AP. If you select Auto, then Router will choose the appropriate WDS Mode
automatically.
• Key type - This option should be chosen according to the AP's security configuration.
It is recommended that the security type is the same as your AP's security type.
• Password - If the Remote AP that your device is going to connect needs password,
you need to fill the password in this blank.
Local Wireless AP Setting
• Local Wireless Name
• Mode - This field determines the wireless mode which the device works on.
• 11b only - Only 802.11b wireless stations can connect to the device.
• 11g only - Only 802.11g wireless stations can connect to the device.
• 11n only - Only 802.11n wireless stations can connect to the device.
- Enter the SSID of AP that you want to access or click
- Enter the MAC address of AP that you want to access.
- Name for the AP.
Configure the Access Point
26