Chapter 1
LED Explanation
Name
(Power)
(Wireless)
(Ethernet)
(WPS)
1. 2. 2.
The Back Panel
Status
On
Power is on.
The system is starting up or the firmware is being
Flashing
upgraded. Do not disconnect or power off your access
point.
Off
Power is off.
On
The wireless function is enabled.
Off
The wireless function is disabled.
The ETHERNET port is connected to a powered-on
On
device.
The ETHERNET port is not connected to a powered-on
Off
device.
This light remains on for 2 minutes when a WPS
On/Off
connection is established, then turns off.
WPS connection is in progress. This may take up to 2
Flashing
minutes.
Get to Know About Your Access Point
Indication
4