Chapter 1
LED Explanation
Name
Status
On
Blinking
once every
second
(Power)
Blinking
twice every
second
Off
On
(Ethernet)
Off
On/Off
(2.4GHz)
On/Off
(5GHz)
1 2 2
Back Panel
Power is on.
The system is starting up or the firmware upgrade is in progress.
Do not disconnect or power off your access point.
WPS connection is in progress. This may take up to 2 minutes.
Power is off.
The Ethernet port is connected to a powered-on device.
The Ethernet port is not connected to a powered-on device.
For Access Point/Multi-SSID mode:
The 2.4GHz wireless band is enabled or disabled.
For Range Extender/Client mode:
The device is connected or not connected to a 2.4GHz main
network.
For Access Point/Multi-SSID mode:
The 5GHz wireless band is enabled or disabled.
For Range Extender/Client mode:
The device is connected or not connected to a 5GHz main
network.
Get to Know About Your Access Point
Indication
5