Chapter 1
LED Explanation
Name
(Power)
(Wireless)
(Ethernet)
(WPS)
1. 2. 2.
The Back Panel
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons
ON/OFF
Power
Status
On
Power is on.
The system is starting up or the firmware is being upgraded. Do not
Flashing
disconnect or power off your access point.
Off
Power is off.
On
The wireless function is enabled.
Off
The wireless function is disabled.
On
The ETHERNET port is connected to a powered-on device.
Off
The ETHERNET port is not connected to a powered-on device.
This light remains on for 2 minutes when a WPS connection is
On/Off
established, then turns off.
Flashing
WPS connection is in progress. This may take up to 2 minutes.
To power on or off the access point.
For connecting the access point to a power socket via the provided power adapter.
Get to Know About Your Access Point
Indication
Description
4