Chapter 1
LED Explanation
1. 2. 2.
The following parts (view from left to right) are located on the rear panel.
Ports or Buttons
Downloaded from
ManualsNet.com
Name
Status
On
Flashing
(Power)
Off
On
(Wireless)
Off
On
(Ethernet)
Off
On/Off
(WPS)
Flashing
The Back Panel
ON/OFF
To power on or off the access point.
Power
For connecting the access point to a power socket via the provided power adapter.
search engine
Get to Know About Your Access Point
Indication
Power is on.
The system is starting up or the firmware is being upgraded. Do not
disconnect or power off your access point.
Power is off.
The wireless function is enabled.
The wireless function is disabled.
The ETHERNET port is connected to a powered-on device.
The ETHERNET port is not connected to a powered-on device.
This light remains on for 2 minutes when a WPS connection is
established, then turns off.
WPS connection is in progress. This may take up to 2 minutes.
Description
4