TP-Link TL-WA901N User Manual page 28

Chapter 4
• 11g only - Only 802.11g wireless stations can connect to the device.
• 11n only - Only 802.11n wireless stations can connect to the device.
• 11bg mixed
device.
• 11bgn mixed
to the device.
• Channel Width - Determines the channel width to be used. It is unnecessary to change
the default value unless required.
• Enable Wireless Radio
stations to access the device.
• Enable SSID Broadcast
to broadcast its name (SSID) on the air. If it's allowed, when wireless clients survey the
local area for wireless networks to associate with, they will detect the SSID broadcast
by the device.
Client Mode
• Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS
is enabled, all traffic from wired networks will be forwarded in the format of WDS
frames consisting of four address fields. If WDS is disabled, three address frames are
used. If your AP supports WDS well, please enable this option.
• Wireless Name of Root AP
Survey to find the network you want to connec to.
• MAC Address of Root AP
• Enable Wireless Radio
function.
• Click the Survey button to detect the SSIDs in the local area.
- Both 802.11b and 802.11g wireless stations can connect to the
- All 802.11b, 802.11g and 802.11n wireless stations can connect
- Select or deselect this check box to allow or deny wireless
- Select or deselect this check box to allow or deny the device
- Enter the SSID of AP that you want to access or click
- Enter the MAC address of AP that you want to access.
- Select or deselect this check box to enable or disable wireless
Configure the Access Point
25