Wireless; Wireless Settings - TP-Link TL-WA901N User Manual

Chapter 4
4. 4.

Wireless

4. 4. 1.

Wireless Settings

1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Wireless > Wireless
3. Four operation modes are supported here, including
Range Extender.
Access Point Mode
• Wireless Network Name
32 characters and make sure all wireless points in the wireless network with the same
SSID. The default SSID is TP-LINK_AP_XXXX (XXXX indicates the last unique four
characters of each device's MAC address). This value is case-sensitive. For example,
TEST is NOT the same as test.
• Channel - Determines the operating frequency to be used. It is not necessary to
change the wireless channel unless you notice interference problems with another
nearby access point.
• Mode - Select the desired wireless mode. The options are:
• 11b only - Only 802.11b wireless stations can connect to the device.
• 11g only - Only 802.11g wireless stations can connect to the device.
• 11n only - Only 802.11n wireless stations can connect to the device.
• 11bg mixed
device.
• 11bgn mixed
to the device.
• Channel Width - Determines the channel width to be used. It is unnecessary to change
the default value unless required.
Settings.
- Identifies your wireless network name. Create a name up to
- Both 802.11b and 802.11g wireless stations can connect to the
- All 802.11b, 802.11g and 802.11n wireless stations can connect
Configure the Access Point
Access Point, Multi-SSID, Client, and
23