Operation Mode; Network; Lan - TP-Link TL-WA901N User Manual

Chapter 4
• Received (Bytes)
• Received (Packets)
• Sent (Bytes)
• Sent (Packets)
• System Up Time - The length of the time since the access point was last powered on
or reset.
Click Refresh to get the latest status and settings of the access point.
4. 2.

Operation Mode

If you want to change the mode of your access point after it has been first configured,
you can select the mode you want in
1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Operation Mode.
3. Select the mode you want.
4. 3.

Network

4. 3. 1.

LAN

1. Visit http://tplinkap.net, and log in using the password you created.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
- Traffic in bytes received from the ETHERNET port.
- Traffic in packets received from the ETHERNET port.
- Traffic in bytes sent out from the ETHERNET port.
- Traffic in packets sent out from the ETHERNET port.
Operation
Configure the Access Point
Mode.
20