Adjusting The Gain; Setting The Rf Power; Setting Hpf (High-Pass Filter); Setting Lock - Audio Technica ATW-R3210 User Manual

Setting ATW-T3201/ATW-T3202

Adjusting the gain

1. From the menu screen, press the UP/DOWN button to select
[GAIN], and then press the SET button.
GAIN
2. Press the UP/DOWN button to select the gain you wish to set.
• The level changes 2dB +/- each time you press the UP/DOWN button.
• It can be set from -10 to +20 dB.
3. Press the SET button.
• The setting is complete.

Setting the RF power

1. From the menu screen, press the UP/DOWN button to select
[RF POWER], and then press the SET button.
RF POWER
High:30mW
2. Press the UP/DOWN button and select [High:30mW],
[Low:10mW] or [Off].
3. Press the SET button.
• The setting is complete.

Setting HPF (High-Pass Filter)

1. From the menu screen, press the UP/DOWN button to select
[HPF], and then press the SET button.
HPF
2. Press the UP/DOWN button to select [On] or [Off].
3. Press the SET button.
• The setting is complete.
0dB
O
21

Setting lock

1. From the menu screen, press the UP/DOWN button to select
[LOCK], and then press the SET button.
LOCK
2. Press the UP/DOWN button to select [Lock] or [Unlock].
Lock Locks transmitter buttons
Unlock Unlocks transmitter buttons
3. Press the SET button.
• The setting is complete.

Setting the function for the function button

Select the function to be performed when the function button is
pressed.
1. From the menu screen, press the UP/DOWN button to select [Fn
BUTTON], and then press the SET button.
Fn BUTTON
2. Press the UP/DOWN button to select the function you wish to
set.
Disable No function
PushToMute Mutes while pressed (even when transmitter
(only for ATW-T3201)* * buttons are locked
1 2
PushToTalk Speaking into the microphone is available
(only for ATW-T3201)* * while pressed (even when transmitter buttons
1 2
are locked)
Mute Presses and hold to mute the transmitter ON/OFF
(only for ATW-T3202)
MuteOnLock Presses and hold to mute the transmitter ON/
(only for ATW-T3202) OFF (even when transmitter buttons are locked)
QuickMute Presses to mute the transmitter ON/OFF
(only for ATW-T3202)*
2
Bkup Freq Presses and hold to switch to backup
frequency (When selected, set the frequency,
group, and channel.)
RF Off Presses and hold to turn on/off RF power
*1 When this function is selected, the function of the MUTE switch set in mute mode is not
available.
*2 When this function is selected, turning the screen back on if it shuts off cannot be used.
3. Press the SET button.
• The setting is complete.
Unlock
Disable