Setting Atw-R3210; List Of Setting Items; Setting The Operating Frequency; Setting The Channel (Receiver) Name - Audio Technica ATW-R3210 User Manual

Setting ATW-R3210

List of setting items

FREQUENCY MANUAL
Gr/Ch
NAME
AUDIO
GROUP SCAN
TX SYNC
SQUELCH AUTO
MANUAL
UTILITIES LOCK
ANT PWR
Gr/Ch EDIT
BACKUP
FREQ
DISPLAY
AF METER
BRIGHTNESS
ACCESS
RESET
VERSION

Setting the operating frequency

Manual setting
1. From the menu screen, turn the control dial, select
[FREQUENCY] and then press the control dial.
2. Select [MANUAL] and press the control dial.
3. Turn the control dial to set the first 3 digits. When finished
setting them, press the control dial.
4. Turn the control dial to set the last 3 digits. When finished
setting them, press the control dial.
• The setting is complete.
Set the operating frequency.
Set the channel name.
Set the audio output level.
Scan for open channels.
Set transmitters via IR SYNC.
Set the squelch level.
Set this function to prevent the
receiver settings from being changed.
Set whether to turn power on or off
to the antenna input terminals.
Edit the channel allocation for user
groups (U1 and U2).
Set the backup frequency.
Set the item prominently displayed at
the center of the main screen.
Switch the level meter on the main
screen between receiver and
transmitter.
Set the display brightness.
Set the user access level.
This returns the receiver settings to
their factory defaults.
This function displays product
information such as the version of the
receiver.
Setting by group/channel
1. From the menu screen, turn the control dial, select
[FREQUENCY] and then press the control dial.
2. Select [Gr/Ch] and press the control dial.
3. Turn the control dial to set the group. When finished setting it,
press the control dial.
4. Turn the control dial to set the channel. When finished setting it,
press the control dial.
• The setting is complete.

Setting the channel (receiver) name

The following characters can be entered:
• The maximum number of characters that can be entered is 8.
Alphabetic (uppercase
letters)
Symbols (+, −, #, &, period)
1. From the menu screen, turn the control dial, select [NAME] and
then press the control dial.
2. Turn the control dial, select the desired character and then press
the control dial.
• The character is input and the cursor moves.
3. Repeat the operation in Step 2 to enter all characters.
4. Turn the control dial, select [End] and then press the control
dial.
• The setting is complete.
15
Numeric
Space