Remote Control Operations - Goldstar WG5005 Owner's Manual

Remote Control Operations

The controls look like this:
Controls
Power
1
To turn the Set ON, push the button. To turn the Set OFF, push the button again.
This button takes priority over any other buttons.
When you first turn it on, the Set is on the High cool mode and the temp. at 72 F
Fan Speed
2
Pressing the Fan Speed button toggles between Low and
High speeds.
On/Off Timer
3
- Stopping Operation
Each press of the button cycles through the options in this order:
1 Hour 2 Hours 3 Hours 4 Hours 5 Hours 6 Hours 7 Hours
8 Hours 9 Hours 10 Hours 11 Hours 12 Hours CANCLE.
The set temperature will be raised by 2 F after 30 minutes and again
by 2 F after another 30 minutes.
- Starting Operation
Each press of the button cycles through the options in this order:
1 Hour 2 Hours 3 Hours 4 Hours 5 Hours 6 Hours 7 Hours
8 Hours 9 Hours 10 Hours 11 Hours 12 Hours CANCLE.
Cool/Energy Saver/Fan/Dry
4
Everytime you push this button, it will toggle between COOL,
ENERGY SAVER, FAN, and DRY.
Temperature Setting
5
This button can automatically control the temperature of the room.
The temperature can be set within a rance of 60 F to 86 F by 1 F.
Select the lower number for lower temperature of the moon.
Operating Instructions
,
Owner s Manual 17