Omron F3SG RE Series User Manual page 262

Appendix
Test Rod
Appearance
To check operation before use, purchase and use the test rod.
Spatter Protection Cover (two pieces per set, common for emitter/receiver)
Appearance
Mirrors (Operating range becomes 12% shorter than the rating)
Appearance
Control Unit
Appearance
F3SG-R
238
User's Manual
Model
F39-TRD14
F39-TRD30
Model
F39-HGA For the F3SG-R of the protective height of 2,000 mm or longer, use
(for F3SG-RA) two Spatter Protection Covers of different lengths.
F39-HGB Please note the following:
(for F3SG-RE) • The operating range of the F3SG-R attached with the Spatter
Protection Cover is 10% shorter than the rating.
• The Spatter Protection Cover extends over the DIP Switch cover
of the F3SG-RA. Be sure to use the Spatter Protection Cover
only after all required settings are made to the DIP Switch.
Material: PC (Transparent cover), ABS (Side wall), Stainless steel
Model
□□□□
F39-MLG Dimension L is the length of mirror part.
□
: Dimension L (mm) Other dimensions: Width 145 mm, Thickness 32 mm
F39-MLG0406 2 sets of cylinder mounting brackets and four screws are included.
F39-MLG0610
F39-MLG0711
F39-MLG0914
F39-MLG1067
F39-MLG1219
F39-MLG1422
F39-MLG1626
F39-MLG1830
F39-MLG2134
Model
G9SA-301 Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Diameter
14 mm dia.
30 mm dia.
Remarks
(Bracket), Aluminum adhesive tape (Fixing Sticker)
Remarks
Output
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• A type of 5 N.O. and 1 N.C.
contacts is also available.
Remarks