Omron F3SG RE Series User Manual page 173

[Side Mounting]
2-S3
44.6
35
26.5
Top/Bottom
23.2
Adjustable Bracket
(F39-LGTB)
9.6
35
Backside : 2-S3
Top/Bottom
Adjustable Bracket
(F39-LGTB)
F3SG-4RA0190-30
Optional
accessory not
F39-JGR2W
connected
Dimension C1 190
Dimension D 140
Dimension G 277.5
Dimension H 303
Dimension I 322
Dimension P 20
Number of
Top/Bottom
2
Adjustable
Brackets*2
*1. Refer to  Connected with Optional Accessories under 4-3-3-1. F3SG-RA Series for more information on the dimensions when optional accessories are connected to the F3SG-RA.
*2. The number of brackets required to mount either one of emitter and receiver.
4-4-3-3. Mounting with Top/Bottom Adjustable Brackets (F39-LGTB)
- Use the brackets of specified quantities and locations according to the dimensions. The other brackets than described
above may not meet the specified ratings and performance.
- When you use the sensor in a situation where the sensor is under a load, increase the number of the brackets used.
- The Top/Bottom Adjustable Bracket and Standard Adjustable Bracket allow beam alignment after fixing the bracket to a
wall surface. The angle adjustment range of the Top/Bottom Adjustable Brackets is ±22.5°. The angle adjustment range
of the Standard Adjustable Brackets is ±15°.
51.65
4
35
40.8
Optional accessory connected*1
F39-LP
F39-BT
F39-BTLP
Same as on the left
Same as on the left
277.5 281 292.5
303 306.5 318
322 325.5 337
Same as on the left
Same as on the left
2-M5 or M6
<Screw for Top/Bottom Adjustable
Bracket: M5 or M6>
F3SG-4RA0160-14
Optional
accessory not
F39-JGR2W
connected
Dimension C2 160
Dimension D 140
Dimension G 277.5
Dimension H 303
Dimension I 322
Dimension P 10
Number of
Top/Bottom
2
Adjustable
Brackets*2
Wiring/Installation
2-M8
<Screw for Top/Bottom Adjustable
Bracket: M8>
[ Unit : mm ]
Optional accessory connected*1
F39-LP
F39-BT
F39-BTLP
Same as on the left
Same as on the left
277.5 281 292.5
303 306.5 318
322 325.5 337
Same as on the left
Same as on the left
F3SG-R
User's Manual
E
149