Omron F3SG RE Series User Manual page 114

System Operation and Functions
The user can make changes to the settings by the Configuration Tool.
Function Name
Reduced Resolution
Number of beams
*It is not possible to configure the Reduced Resolution function together with the Muting function. To
enable settings of the Reduced Resolution function, disable the Muting function.
In addition, setting parameters of the following functions can be saved according to the states where
the Muting function is enabled and disabled, respectively. After changing the Muting function from
Enable to Disable or from Disable to Enable, also check the settings of these functions again.
Affected functions: External Device Monitoring (EDM), Start Interlock, Restart Interlock, Auxiliary
Output, Lamp Output
Make sure the Position 8 of the DIP Switch is set to Configuration Tool Enabled to activate the settings by the
Configuration Tool.
Refer to Safety Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User's Manual for more
information on setting this function by the Configuration Tool.
F3SG-R
90
User's Manual
Factory Default Setting
Disable Enable*/Disable
1 1 to 3 beams in 1-beam increments
Available Parameters