Table of Contents
Advertisement
Chapter 10 Quality of Service (QoS)
Traffic Policing
Traffic policing is the limiting of the input or output transmission rate of a class of traffic on the basis of
user-defined criteria. Traffic policing methods measure traffic flows against user-defined criteria and
identify it as either conforming, exceeding or violating the criteria.
Traffic Rate
Traffic Rate
Time
Time
(Before Traffic Policing)
(After Traffic Policing)
The VMG supports three incoming traffic metering algorithms: Token Bucket Filter (TBF), Single Rate Two
Color Maker (srTCM), and Two Rate Two Color Marker (trTCM). You can specify actions which are
performed on the colored packets. See
Section 10.8 on page 162
for more information on each
metering algorithm.
10.3 The Quality of Service General Screen
Click Network Setting > QoS > General to open the screen as shown next.
Use this screen to enable or disable QoS and set the upstream bandwidth. See
Section 10.1 on page 149
for more information.
Figure 74 Network Settings > QoS > General
VMG8825-B Series User's Guide
151
Advertisement
Table of Contents
