Table of Contents
Advertisement
Click Network Setting > Home Networking > Wake on Lan to open this screen.
Figure 63 Network Setting > Home Networking > Wake on Lan
The following table describes the labels on this screen.
Table 37 Network Setting > Home Networking > Wake on Lan
LABEL
Wake by
Address
IP Address
MAC Address
Wake up
8.8 The TFTP Server Name Screen
Use the TFTP Server Name screen to identify a TFTP server for configuration file download using DHCP
option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP address or the
hostname of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 64 Network Setting > Home Networking > TFTP Server Name
The following table describes the labels on this screen.
Table 38 Network Setting > Home Networking > TFTP Server Name
LABEL
TFTP Server
Name
Apply
Cancel
Chapter 8 Home Networking
DESCRIPTION
Select Manual and enter the IP address or MAC address of the device to turn it on remotely. The
drop-down list also lists the IP addresses that can be found in the VMG's ARP table. Select an IP
address and it will then automatically update the IP address and MAC address in the following
fields.
Enter the IPv4 IP address of the device to turn it on.
Enter the MAC address of the device to turn it on. A MAC address consists of six hexadecimal
character pairs.
Click this to send a wake up packet to wake up the specified device.
DESCRIPTION
IP address or the hostname of a single TFTP server.
Enter the
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG8825-B Series User's Guide
138
Advertisement
Table of Contents
