Table of Contents
Advertisement
Table 77 Interface Group Configuration (continued)
LABEL
Filter Criteria
WildCard
Support
Modify
OK
Cancel
15.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following screen.
Figure 109 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 78 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option 60
Enable
wildcard
DHCP Option 61
DHCP Option
125
Enterprise
Number
Chapter 15 Interface Grouping
DESCRIPTION
This shows the filtering criteria. The LAN interface on which the matched traffic is received will
belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Edit icon to change the group setting
Click the Delete icon to delete this group from the VMG.
Click OK to save your changes back to the VMG.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
Select this and enter vendor specific information of the matched traffic.
Enter the vendor's 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Authority).
VMG8825-B Series User's Guide
195
Advertisement
Table of Contents
