ZyXEL Communications VMG8825-B Series User Manual page 256

Press the flash key to put the caller on hold.
1
When you hear the dial tone, dial "*98#" followed by the number to which you want to transfer the call.
2
After you hear the ring signal or the second party answers it, hang up the phone.
3
USA Three-Way Conference
Use the following steps to make three-way conference calls.
When you are on the phone talking to someone (party A), press the flash key to put the caller on hold
1
and get a dial tone.
Dial a phone number directly to make another call (to party B).
2
When party B answers the second call, press the flash key to create a three-way conversation.
3
Hang up the phone to drop the connection.
4
If you want to separate the activated three-way conference into two individual connections (with party
5
A on-line and party B on hold), press the flash key.
If you want to go back to the three-way conversation, press the flash key again.
6
If you want to separate the activated three-way conference into two individual connections again,
7
press the flash key. This time the party B is on-line and party A is on hold.
23.10.2.4 Phone Functions Summary
The following table shows the key combinations you can enter on your phone's keypad to use certain
features.
Table 117 Phone Functions Summary
ACTION
*98#
*66#
*95#
#95#
*41#
#41#
****
####
*82
*67
FUNCTION
Call transfer
Call return
Enable Do Not Disturb
Disable Do Not Disturb
Enable Call Waiting
Disable Call Waiting
IVR
Internal Call
One Shot Caller Display Call
One Shot Caller Hidden Call
VMG8825-B Series User's Guide
Chapter 23 Voice
DESCRIPTION
Transfer a call to another phone. See
(Europe type) and Section 23.10.2.3 on page 255
Place a call to the last person who called you.
Use these to set your phone not to ring when someone calls you, or to
turn this function off.
Use these to allow you to put a call on hold when you are answering
another, or to turn this function off.
Use these to set up Interactive Voice Response (IVR). IVR allows you to
record custom caller ringing tones (the sound a caller hears before you
pick up the phone) and on hold tones (the sound someone hears when
you put their call on hold).
Call the phone(s) connected to the VMG.
Activate or deactivate caller ID for the next call only.
256
Section 23.10.2.2 on page 253
(USA type).