Add/Edit A Qos Policer - ZyXEL Communications VMG8825-B Series User Manual

Table 53 Network Setting > QoS > Policer Setup (continued)
LABEL
Name
Regulated
Classes
Meter Type
Rule
Action
Modify

10.7.1 Add/Edit a QoS Policer

Click Add New Policer in the Policer Setup screen or the Edit icon next to a policer to show the following
screen.
Figure 82 Policer Setup: Add/Edit
The following table describes the labels in this screen.
Table 54 Policer Setup: Add/Edit
LABEL
Active
Name
Chapter 10 Quality of Service (QoS)
DESCRIPTION
This field displays the descriptive name of this policer.
This field displays the name of a QoS classifier
This field displays the type of QoS metering algorithm used in this policer.
These are the rates and burst sizes against which the policer checks the traffic of the member
QoS classes.
This shows the how the policer has the VMG treat different types of traffic belonging to the
policer's member QoS classes.
Click the Edit icon to edit the policer.
Click the Delete icon to delete an existing policer. Note that subsequent rules move up by one
when you take this action.
DESCRIPTION
Select Enable or Disable to activate or deactivate the policer.
Enter the descriptive name of this policer.
VMG8825-B Series User's Guide
161