ZyXEL Communications VMG8825-B Series User Manual page 188

Figure 102 Network Setting > IGMP/MLD
The following table describes the labels in this screen.
Table 73 Network Setting > IGMP/MLD
LABEL DESCRIPTION
IGMP/MLD Configuration
Default Version Enter the version of IGMP (1~3) and MLD (1~2) that you want the VMG to use on the WAN.
Query Interval Enter the number of seconds the VMG sends a query message to hosts to get the group
membership information.
Query Response Enter the maximum number of seconds the VMG can wait for receiving a General Query
Interval message. Multicast routers use general queries to learn which multicast groups have members.
Last Member Enter the maximum number of seconds the VMG can wait for receiving a response to a Group-
Query Interval Specific Query message. Multicast routers use group-specific queries to learn whether any
member remains in a specific multicast group.
Robustness Enter the number of times (1~7) the VMG can resend a packet if packet loss occurs due to
Value network congestion.
Maximum Enter a number to limit the number of multicast groups an interface on the VMG is allowed to
Multicast join. Once a multicast member is registered in the specified number of multicast groups, any
Groups new IGMP or MLD join report frames are dropped by the interface.
Chapter 13 IGMP/MLD
VMG8825-B Series User's Guide
188