Caution - Philips SCF334/61 Manual

Warnings to avoid poisoning and contamination and to ensure hygiene:
-
For hygienic reasons, the breast pump is only intended for repeated use by a single user.
-
Clean, rinse and disinfect all pump parts, except the motor unit, the tube and cap and the adapter,
before each use.
-
Only store breast milk collected with a cleaned and disinfected pump.
-
Do not use the breast pump if the silicone diaphragm appears to be damaged or broken. See
chapter 'Ordering accessories' for information on how to obtain replacement parts.
-
Do not use antibacterial or abrasive cleaning agents when you clean breast pump parts.
-
If you are not going use the appliance for a long period of time, remove the batteries to prevent
leaking of batteries.
Warnings to avoid breast and nipple problems and pain:
-
Do not attempt to remove the pump body from your breast while under vacuum. Switch off the
appliance and break the seal between your breast and the pump funnel with your finger. Remove
the pump from your breast.
-
Never use the breast pump while you are sleepy or drowsy to avoid lack of attention during use.
-
Always switch off the breast pump before you remove the pump body from your breast to release
the vacuum.
-
Never use any accessories or parts from other manufacturers or that Philips Avent does not
specifically recommend. This could lead to improper working of the appliance and could influence
Electromagnetic Compatibility (EMC). If you use such accessories or parts, your warranty becomes
invalid.
-
Do not continue pumping for more than five minutes at a time if you do not succeed in expressing
any milk. Try to express at another time during the day.
-
If the process becomes very uncomfortable or painful, stop using the pump and consult your
breastfeeding advisor.
-
If the pressure generated is uncomfortable or causes pain, switch off the appliance, break the seal
between the breast and the pump body with your finger and remove the pump from your breast.
-
Never drop or insert any foreign object into any opening.

Caution

Caution to prevent damage to and malfunctioning of the product:
-
Prevent the adapter and motor unit from coming into contact with water.
-
Keep the adapter and the silicone tubes away from heated surfaces to avoid overheating and
deformation of these parts.
-
Never put the motor unit or the adapter in water, in a dishwasher or in a sterilizer.
-
Although the breast pump is compliant with applicable EMC directives, it may still be susceptible
to excessive emissions and/or may interfere with other equipment. A consequence can be that
the breast pump switches off or goes into error mode. To prevent interference, keep other electric
equipment away from the breast pump during expressing (see ‚Technical information').
-
There are no user serviceable parts inside the motor unit of the breast pump. No modification of
equipment is allowed. If you do, your warranty becomes invalid.
-
Do not short-cut the supply terminals of the batteries.
English
9