Monitor Value/Setting Data Compound Read (Compoway/F Communications) - Omron K3HB-PPB Technical Communications User's Manual

Commands and Responses (CompoWay/F Communications)
Response
1-9-3 Monitor Value/Setting Data Compound Read (CompoWay/F
Communications)
Command
Response
1-14
To specify the variable type or address, see SECTION 2 List of Settings
(page 2-1). The upper limit of an address will vary depending on the variable
type.
This command can be used in both setting area 0 and setting area 1.
MRC SRC Response code
"0000"
"01" "01"
Response codes: The above indicates a normal end. For the response codes,
see 1-5 Reading the Variable Area (page 1-9).
Variable
MRC SRC type Address
"01" "04"
Variable type
"C0" "0000" to "0004"
"C1" to "C2" "0000" to "0004"
"C4" to "CB" "0000" to "0027"
Multiple monitor values or setting data can be read by sending a single com-
mand. Up to 20 items can be read even if the addresses are not contiguous.
To specify the variable type or address, see SECTION 2 List of Settings
(page 2-1). The upper limit of an address will vary depending on the variable
type.
This command can be used in both setting area 0 and setting area 1.
If an area type error or a setting data error occurs in any of the data being
read, no data will be read.
MRC SRC Response code
"01" "04" "0000"
Response codes: The above indicates a normal end. For the response codes,
see 1-5 Reading the Variable Area (page 1-9).
Data
Setting data
Variable
Bit position type Address
"00"
Variable type Address
Address Setting data (explanation)
Monitor values
Setting data of setting area 0
Setting data of setting area 1
Variable
type
Data
Type
Monitor value / Setting data
Variable type
Type Monitor value / Setting data
Section 1-9
Bit position
"00"
Bit position
"00"
Data