3 Measuring and monitoring System
3-7
Initialization of Setting Value
This section describes how to initialize the setting values of the K6CM devices.
To initialize the setting value, press the [ALM RST] key and the [DISP] key at the same time for 5 sec-
onds or more.
3 - 28
Press the keys at the same time for 5 seconds
or more.
While the keys are pressed at the same time,
the numeric display LCD flashes.
After 5 seconds or more, K6CM is reset, and
initialization of the setting value is completed.
K6CM Motor Condition Monitoring Device User's Manual (N219)