Enable Open Ports
Comment
Local Computer
Choose PC
Protocol
Start Port
End Port
5.2.4 Well-known Port Number List
This page provides some well-known port numbers for your reference.
NAT Setup
Check to enable the Open Port function for this entry.
Specify the name for the defined network service.
Enter the private IP address of the local host.
Click this button and, subsequently, a window having a list of
private IP addresses of local hosts will automatically pop up.
Select one appropriate IP address of the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or
NONE for selection.
Specify the starting port number of the service offered by the
local host.
Specify the ending port number of the service offered by the
local host.
5-8