capability.
Keep WAN Connection
Enable PING to keep alive: Check to enable PING to keep alive
function. Normally, this function is for Dynamic IP environment. If you
need to enable the function, assign a public IP address in the PING to
the IP and a timer in the PING Interval.
WAN IP Network Settings
Obtain an IP address
automatically
Router Name
Domain Name
Default MAC Address &
Specify a MAC Address
3.2.4 Using PPTP with a DSL Modem
Click Internet Access Setup > PPTP to enter the setup page, as shown
below. Herein, we use an example to explain the corresponding setting.
The exact settings should be provided by your DSL service provider.
Internet Access Setup
The option must be enabled.
Depending on your Cable ISP, this option may or may
not be left blank. Some ISPs require this name for
access authentication.
Depending on your Cable ISP this field may or may
not be left blank.
These two options are mutually exclusive. Some
Cable ISPs use a specific MAC address for access
authentication. In such cases you need to check the
Specify a MAC Address box and enter the MAC
address in the MAC Address fields. Click OK and
restart the router to allow the settings to take affect.
3-8