Table of Contents
Advertisement
Check to enable the Filter Rule
Enables the filter rule.
Pass or Block
Specifies the action to be taken when packets match the rule.
Block
Immediately
Pass
Immediately
Block If No
Further Match
Pass If No
Further Match
Branch to other Filter Set
If the packet matches the filter rule, the next filter rule will branch to the
specified filter set.
Duplicate to LAN
If you want to log the matched packets to another network device, check
this box to enable it.
The MAC Address of the specified network device or PC is defined in
Firewall >>general Setup >> MAC Address for Logged Packets
Duplication.
Log
Check this box to enable the log function. Use the Telnet command log-f
Firewall Setup
Packets matching the rule will be dropped immediately.
Packets matching the rule will be passed immediately.
A packet matching the rule, and that does not match further
rules, will be dropped.
A packet matching the rule, and that does not match further
rules, will be passed through.
6-10
Hide quick links:
Advertisement
Table of Contents
